Notes purchased by the user before
Note
● indoor use only.
● seating when net load 980N {100kgf}.
● based on the use of the environment and the use of time, the product will be discoloration phenomenon.
Caution
● Do not spill water on the toilet and power plug. If the spill happened, please wipe clean and immediately.
● Do not stand on toilet.
● If other faucet use may weaken because of momentum caused by dirt residues.
● Keep a distance of more than 1M halogen heaters and other heating equipment.
● although it was designed to reduce water splashes, but there is still the possibility of water splashing. Of splashes of water, you can float on the water a toilet to reduce splash water situation.
● When cleaning drains, be sure to contact the cleaning and maintenance professionals to remove the toilet.
● According microbial water quality, water temperature, toilet bowl can cause stains and so on. If laissez-faire stains caused by these microorganisms, the situation will mildew (black) generated occurs (as soon as possible to clear).
● Do not use this product on acid, alkaline detergent, containing sodium bicarbonate, alcohol (ethanol, iso-propionic acid, etc.), orange oil or citrus aroma of detergents and deodorants, drip deodorant . Do not use a different acid, thinner, volatile oil, alcohol and other drugs in this commodity.
● damaged goods, interior products exposure and other factors may cause electric shock.
● occurs toilet flushing water splashes will occur. When the toilet flushing water and water collision between the cause of this phenomenon. Depending on the nature of the dirt, the dirt may be attached to toilet surface, can not be cleared when the wash. Toilet stains caused by micro-organisms can not be cleaned, mildew, require periodic re-cleaning.
● Do not put objects other than toilet paper (newspapers, paper disposable diapers, sanitary napkins, etc.). If the fall in the toilet may cause clogging toilet articles, be sure to remove it. Toilet blockage can cause sewage spills.
● Prevent hard objects, heavy, sharp objects fall on the toilet.
● Do not place a cigarette thrown into the stool.
Construction Before Installing
● To prevent leakage, please coated with silicone adhesive around the toilet base.
● To prevent water leakage into the downstairs, please take waterproof measures.
● Be sure to have expertise in the installation and construction personnel drain installation.
● Be sure to use the correct installation or use the socket connection lines.
Installation Related
● Use temperature range: 0 ℃ ~ 40 ℃.
● Make sure that the toilet can be installed in the bathroom space. Also, make sure the bathroom of the opening and closing will not hit the toilet.
● Perform construction at ground level. If the uneven ground, will cause shaking or leaking toilet, there may not be sufficient to ensure that the toilet flush.
● When the drain installation, please give full consideration to drain diameter, length, slope, it may cause dirty or clogged toilet flushing.
● In cold areas, confirmed through water, in order to prevent freezing damage caused by the toilet, be sure to turn on the water operation.
On into the drainage
● Due to the different positions of both the water may not be installed so before installation, make sure the inlet position.
● Use the pressure range is 0.049Mpa (flow) ~ 0.735Mpa (at rest). Measure the level of the ground state. Please note that the static pressure can not serve as a reference.
● ground flange with packing and drain pipe diameter 110MM supporting use.
About Power
● By law, electrical engineering (including waterproof settings) require qualified personnel for construction.
● In order to ensure safety in the deep socket to form a watertight cover.
● The power cord is 1.5M. Please socket provided in the power line to reach the range.
● Be sure to use the AC 220V.50HZ.
● Make sure the outlet is negative, please correct wiring in accordance with NE.
● wire plug shape 3 hole plug.
● Be sure to use sockets and wiring inside the appliance rating.
● Make sure the outlet is set in a position above the ground 80CM.
● Please be sure to set the residual current circuit breaker.
Remote relevant
● signals from the remote control via the ceiling and walls to the toilet main reception reflection, so please do not set the rack or cabinet at the top of the remote control and toilet main reception site.
● Do not set the mask object in the remote control light receiving unit.
* This catalog describes only part of the use and construction precautions, detailed precautions, refer to "Operating Instructions."